200ABH-200 family · An Abhilekh Product

ABH-200-LR

Long-range online monitor

Weak-signal sites

ABH-200 with an external SMA dipole for large cold rooms and remote depots where the internal antenna isn't enough.

ABH-2003 channelsIP54 in use / IP65 cappedE-paper 200×200Wi-Fi 2.4 GHz (ESP32-C3-MINI-1U)
ABHILEKH4.4 °CRH 46% · Wi-Fi ⟂ABHILEKH · NEODRICS

Design visualization · 88.2 × 69.9 × 16.8 mm · probe pod 30.5 mm

NormalExcursionFault
3
Sensing channels
409,600
Readings stored
Always on when powered · RTC cell ≈10 yr
Battery life (calc.)
IP54 in use / IP65 capped
Ingress protection
1 s minimum
Default interval
Specifications

ABH-200-LR — every number a QA team asks for

Channel-level accuracy, memory depth in readings, enclosure geometry and the firmware trust chain — the full picture before you ask for the pilot.

ABH-200-LR · published specifications
Product typeOnline · Wi-Fi monitor
Sensing channels3 (Probe temperature · Ambient T + RH)
Probe temperaturePRB-PT100-3W Class A · −50…+200 °C
Ambient T + RHSHT41 · ±0.2 °C typ
Measurement accuracyProbe element ±0.15 °C at 0 °C (PT100 Class A, IEC 60751) · channel ±0.62 °C uncalibrated → ±0.36 °C after 4-point factory calibration
Display & indication1.54″ e-paper 200 × 200 · −25…+50 °C · holds last reading while asleep
ConnectivityWi-Fi 2.4 GHz (ESP32-C3-MINI-1U) · MQTT over TLS 1.2+ — External SMA dipole · ≤2 dBi
PowerUSB 5 V (≈29 mA) · CR2032 RTC ≈10 yr
Battery lifeAlways on when powered · RTC cell ≈10 yr — SMA bulkhead replaces the internal antenna path
Memory16 MB W25Q128JV · 409,600 readings · separate never-erased audit region
Sample interval1 s minimum · configurable
Enclosure88.2 × 69.9 × 16.8 mm · probe pod 30.5 mm · Healthcare-grade disinfectant-resistant PC/ABS · UL94 V-0 · white
Ingress protectionIP54 in use / IP65 capped (design targets)
MountingKeyhole (2×) + bonded 10×2 mm magnets · SMA bulkhead on the enclosure
Operating band−25 to +50 °C (e-paper limit)
FirmwareSigned .abhfw packages · dual-bank A/B · RSA-2048 · trial boot with automatic rollback · MQTT over TLS 1.2+ with per-device credentials · X.509 client certificates / mTLS on the roadmap
Factory identityABH-[model]-[YYWW]-[5-digit sequence] — factory identity written to the ID EEPROM
PortsUSB-C power · M12 probe port · SMA antenna

The ABH line is at the design-frozen, pre-production stage: every enclosure has passed generated fit-check geometry (791/791 checks, 20/20 SKUs) and every battery-life, drop, thermal and IP figure shown is a calculated or simulated design estimate — measured values replace them as validation hardware runs. Regulatory marks above are the certification roadmap, not held certificates.

Why it fits
  • External whip for metal-clad cold rooms and far corners of the site
  • Same probe channel and compliance chain as ABH-200
  • Thermal pad to the lid keeps Wi-Fi duty-cycle heat away from the sensor
Built for
  • Cold rooms & large sitesExternal high-gain antenna (LR) or industrial multi-probe coverage for mapped rooms.
See all applications
Works with
  • PRB-PT100-3W — PT100 immersion probePRB-PT100-3W-3M · PRB-PT100-3W-5M · PRB-PT100-3W-10M
  • ABH-300 — Industrial multi-probe monitor
Downloads

Datasheets describe the current design release (ABH-PLATFORM 0.0.4). Battery-life and IP figures inside are calculated design estimates; measured values follow validation hardware.

Part of the platform

One PCB, one firmware, one compliant record

One 80 × 50 mm 4-layer platform PCB — 146 parts, single-sided SMT — becomes 20 SKUs by BOM selection and a SKU record in the on-board ID EEPROM.

Signed firmware

Signed .abhfw packages · dual-bank A/B · RSA-2048 · trial boot with automatic rollback

Data integrity

MQTT over TLS 1.2+ with per-device credentials · X.509 client certificates / mTLS on the roadmap

Offline evidence

Plug an offline logger into a PC and it enumerates a FAT16 drive with README.TXT, DATA.CSV and an ECDSA P-256-signed REPORT.PDF — a self-verifying trip record.

Calibration

Probe channel templates live in the ID EEPROM; the platform tracks NIST-traceable calibration certificates, due dates and reminders per probe.

Certification roadmap: EN 12830:2018 — temperature recorders · CE — RED / EMC / safety · FCC Part 15 · WHO PQS E006 — vaccine cold chain · IEC 61010-1 / IEC 62368-1 · UN 38.3 / IEC 62133-2 — cells & packs — targets, not held certificates.

Evaluate on your cold chain

Put the ABH-200-LR to work

Book a demo and we'll scope a pilot around your sites — quantities, probes, alert rules and the reports your QA team will hand the inspector.